Using your BabyDice tag-along push-chair/ jogger
Detach and open the chair in easy steps:
Step 1:
Secure your bike safely against a suitable exterior bicycle stand, or held by a second person, so that you can safely remove your child out of their child bike-seat in the normal way.
NB. Once your child has been safely removed from their child bike-seat in the normal way, and if your child is very young and cannot stand by themselves, and/or will wander off, a second person or cycling partner will be needed to hold or stop your child from wandering before proceeding to the next step.
Step 2.
Un-clip and remove the retaining pin, then pull the tow bar from your bike.
Step 3.
Remove the BabyDice push-chair away from your bike.
Step 4.
On the left side of the push chair release the white latch to open the push chair.
Step 5.
Pull back both push chair locking devices (just below the push chair’s handle) and open the push chair.
Step 6.
Open the lever by flipping it over 180 degrees, turn the lever twice, anti-clock wise.
Step 7.
Rotate the tow arm anti-clockwise until it is touching the push chair frame and out of the way as shown and lock the clamp.
Step 8.
Unlock the front wheel so that it swivels freely or faces forward.
SIMPLY REVERSE STEPS 1 TO 8 to transfer your child from the BabyDice push-chair/ jogger back to your child bike-seat.
Video Guides:
Please Note: Although many countries and states (including Germany) do not have mandatory helmet laws, please ensure that when carrying children in the child bike seat, your child is wearing a helmet as required.
